Cart Series: G200
Cart Type: Open
An economical cart for in-house stocking or storage, or when access from both sides is necessary. The G-200 is available in standard sizes, or dimensions can be adjusted to your requirement. 3, 4, and 5 shelf models are also available.
Body Structure: All welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.
Shelf Structure: Base shelf plus two fixed shelves of 16 ga. aluminum sheet with mill applied white baked enamel finish. Shelves are supported by a flange of horizontal extrusion on all four sides of the cart, and one lengthways 1 1/4" square tube center support. Shelves are flat.
Finish: Carts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1).
Casters: Top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.
Bumpers: 4 non-marking corner bumpers.
Options: Closed top, top front bar, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick-ups and your custom requirements.