Cart Series: G300BD
Cart Type: Open
Our G-300-BD carts are the workhorse of an efficient exchange cart system. The reinforced shelves swing easily to bin position and are held secure without the need for latches or slide bolts. The base shelf is double reinforced to withstand heavy soiled loading. These rugged carts are completely cart washable, and are structurally designed to withstand decades of off-site trucking. The 31” door swings a full 180 degrees to the open position, and is held in place by a magnetic catch. The door is secured in the closed position with two spring-loaded slide bolts. The back door offers a clear ergonomic advantage by allowing the staff unrestricted access to the soiled linen bags.
Body Structure: All welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open with one lengthways cross brace. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.
Shelf Structure: Base shelf plus two convertible shelves of 16 ga. aluminum sheet with mill applied white baked enamel finish over an all welded aluminum extrusion frame. The shelf sheet is supported on all four sides by the frame, and has one lengthways 1 1/4" square tube center support. Shelves are sloped 5% to back of cart (except base). Shelves are supported by two aluminum 1/4" x 3" corner gussets welded to the cart structure on back and end, and move on stainless steel hinge pins mounted in the front ends of the shelves. Stainless steel stops secure shelves in "bin" position.
Finish: Carts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1).
Casters: Top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.
Bumpers: 6 non-marking corner bumpers.
Doors All welded 1 1/4" x 11 ga. extruded square tube door frame and horizontal members, with 3/4" x 14 ga. round tube vertical closure. Full length S/S piano hinge allows the 31” door to swing a full 180 degrees to the open position, and is held in place by a magnetic catch. The door is secured in the closed position with two spring-loaded slide bolts.