G500 Garment Cart

Cart Series: G500
Cart Type: Open

G.S.M. Garment Carts are available with an optional hanger retention bar that clamps hangers in position during transport. The lower front 3rd of the cart forms a bin, and has a reinforced base for loading bulk delivery or soiled return. A very versatile cart! Also check our options and variations to see how bins or pigeon-holes can be incorporated into this cart.

Standard Features

Body Structure: All welded 1 1/4" x 11 ga. extruded square tube corner posts with 3/4" x 14 ga. round tube vertical closure (back and ends) and patented structural channel horizontal members. Top is open with one lengthways cross brace. Vertical closure tubes pass through horizontal members and are welded at each contact point inside the structural channel. All structural profiles are extruded aluminum with rounded corners.

Shelf Structure: Base only, of 16 ga. aluminum sheet with mill applied white baked enamel finish, supported by flange of horizontal extrusion on all four sides of cart, and one lengthways 1 1/4" square tube center support.

Garment Bar: is Schedule 40, 1" OD aluminum pipe, welded to cart frame at both ends and with a center support.

Finish: Carts are anodized to a film thickness of 8 to 10 microns after completion of fabrication and all welding procedures. (conforms to military spec. 4-8625 type 2 class 1).

Casters: Top quality 6", non-marking grey rubber with 450lbs. each rated capacity, two fixed and two swivel, with fixed casters mounted on the left-hand end of the cart. Casters are spaced 17 3/4" center to center.

Bumpers: 6 non-marking corner bumpers.

Options: Hinged hanger retention bar, closed top, top front bar, card holders, wrap around bumper, wear plates, caster brakes and directional locks, tow bars, conveyor pick-ups and your custom requirements.